
Stability under extreme conditions
The LAMILUX Rooflight F100 W was specifically designed for heavy loads and sets new standards in terms of stability. Thanks to its innovative, wave-shaped geometry, it optimally distributes loads and withstands enormous amounts of snow. At the same time, it remains lightweight and easy to handle. It was also tested in a wind tunnel under heavy rain conditions. Variants with impact resistant glazing can also withstand heavy hail with a grain size of up to 5 cm. With over 50 sizes, various glazing options, and designs ranging up to SHEV systems, the LAMILUX Rooflight is a flexible solution for any industrial roof. Thanks to universal adapter frames, the roof light can be individually adapted to building requirements, even during renovation projects. Thus, the Rooflight F100 W ensures safety in an emergency and provides light and fresh air every day.
Configure the Rooflight F100 W now!Available sizes of the Rooflight F100 W
| Order Dimensions top roof edge side (in cm) | |||||
| 50 / 100 | 90 / 90 | 100 / 300 | 125 / 125 | 150 / 240 | 180 / 270 |
| 50 / 150 | 90 / 120 | 120 / 120 | 125 / 250 | 150 / 250 | 180 / 300 |
| 60 / 60 | 90 / 145 | 120 / 150 | 135 / 230 | 150 / 270 | 180 / 320 |
| 60 / 90 | 100 / 100 | 120 / 180 | 140 / 140 | 150 / 300 | 200 / 200 |
| 60 / 120 | 100 / 150 | 120 / 240 | 150 / 150 | 180 / 180 | 200 / 250 |
| 70 / 135 | 100 / 200 | 120 / 250 | 150 / 180 | 180 / 210 | 200 / 300 |
| 80 / 80 | 100 / 240 | 120 / 270 | 150 / 200 | 180 / 240 | |
| 80 / 150 | 100 / 250 | 120 / 300 | 150 / 210 | 180 / 250 | |

Fire protection and natural ventilation
The Rooflight F100 W is not only a reliable source of natural light, but can also be used as a certified smoke and heat exhaust vent (RWG). In the event of a fire, the dome opens automatically and quickly vents smoke and heat to the outside. This secures escape and rescue routes, facilitates firefighting efforts, and protects lives.
Especially in industrial and production facilities, the use of SHEV systems is mandatory under legal regulations to ensure preventive fire protection. The number of systems that must be installed depends on the size and use of the facility. In practice, however, a smoke exhaust area of approximately 2% of the floor area is considered a guideline. With the Rooflight F100 W, you’re choosing a component that combines stability, energy efficiency, and safety in a single product.
Learn more about the rooflight as a smoke and heat exhaust system!
Our service for your LAMILUX Rooflight F100 W
Accessories for your LAMILUX Rooflight F100 W

Electrically operated, internal sunshade mounted on the inner sides of the upstand

Integrated into the upstand with easy removal for cleaning purposes

Easy access to the flat roof for maintenance and repair work; can be operated electrically as an option

Weather protection hood with integrated insect screen, designed for integration into 30–70 cm high upstands for ventilation, with an airflow rate of 180 m³/h and IP 34 protection rating

Can be integrated into 50-cm- and 70-cm-high upstands with a weatherproof hood for ventilation, with an airflow rate of 840 m³/h and protection class IP 44

Automatic closing of the rooflight in windy or rainy conditions via sensors factory-installed on the rooflight frame

Geometric smoke exhaust system for ventable rooflights with a SHEV control center, emergency power supply, two smoke and heat exhaust switches, one fan switch, and a spindle motor (24 V, 500 mm upstroke)

Magnetic switch integrated into the frame profile to detect the locked state, with a connection to the alarm system

Electrically operated, internal sunshade mounted on the inner sides of the upstand

Integrated into the upstand with easy removal for cleaning purposes

Easy access to the flat roof for maintenance and repair work; can be operated electrically as an option

Weather protection hood with integrated insect screen, designed for integration into 30–70 cm high upstands for ventilation, with an airflow rate of 180 m³/h and IP 34 protection rating

Can be integrated into 50-cm- and 70-cm-high upstands with a weatherproof hood for ventilation, with an airflow rate of 840 m³/h and protection class IP 44

Automatic closing of the rooflight in windy or rainy conditions via sensors factory-installed on the rooflight frame

Geometric smoke exhaust system for ventable rooflights with a SHEV control center, emergency power supply, two smoke and heat exhaust switches, one fan switch, and a spindle motor (24 V, 500 mm upstroke)

Magnetic switch integrated into the frame profile to detect the locked state, with a connection to the alarm system
LAMILUX Rooflight F100 W for industrial roofs
The Rooflight F100 W offers maximum stability and superior resistance to wind, snow, and hail. With its innovative design, it combines robustness, durability, and reliable protection for industrial and commercial buildings. At the same time, it brings natural daylight into the building, thereby improving the work environment. This makes the Rooflight F100 W the ideal choice for anyone looking for a safe, functional, and future-proof solution.
Documents and downloads
Intended use of daylight systems
Instructions for use
cz, dk, en-us-gb, es, fi, fr, gb, hu, it, nl, no, pl, ro, se, tr
Rooflight F100
3D Assembly instruction
cn, cz, dk, en-us-gb, es, fi, fr, hu, it, jp, nl, no, pl, ro, ru, se, tr
Rooflight F100 W
Assembly instruction
cn, cz, dk, en-us-gb, es, fi, fr, hu, it, jp, nl, no, pl, ro, ru, se, tr




































































